Spots of rust on your bike can be a real pain. They can make your ride uncomfortable and they just look bad. Thankfully, there are several ways to remove rust from bikes that are easy to do and won’t cost you much money at all.
WD-40 can be used in many ways to remove rust from your bike
Using WD-40 to remove rust from your bike is a great option. It’s a multi-purpose chemical that can get rid of rust, clean and protect metal objects, and even help you loosen stubborn screws. WD-40 is also safe for use on most bike parts. However, you should avoid spraying it directly onto painted surfaces because the solvent in WD-40 will eventually cause paint to deteriorate over time.
Here’s how to get rid of the rust:
Spray WD-40 on the rusty spots, then wipe it with a rag.
Let the WD-40 sit for a few minutes and watch as all that pesky rust comes off!
Brushing the rust with a wire brush.
Now that the WD-40 has softened the rust, you can remove it by brushing it off with a wire brush. The best way to do this is in a circular motion, starting from one side of your bike and moving around until you’ve brushed every inch.
After you’ve brushed all over your bike with a wire brush and wiped up any WD-40 that came out, use another clean cloth and dry off all traces of WD-40 with it.
Clean and polish a bike to prevent rust.
- Clean and polish a bike to prevent rust.
- Remove all dirt, grime, and grease from the frame with soap and water. Dry it with a towel.
- Spray WD-40 on any rusted areas and let it soak in for 30 minutes before wiping off with a clean cloth. The oil will loosen rust particles so you can wipe them away easily instead of scrubbing them off by hand.
- Use another clean cloth to polish the bike after you’ve removed the WD-40 residue.
- Follow up by drying off any remaining moisture with yet another clean cloth so no water spots remain behind on your shiny new frame!
We hope that you have learned how to remove rust from your bike with WD-40. It is a great product that can be used in many ways, and we encourage you to continue using it on your vehicle or other metal items. If you have any questions about this topic please leave them below in the comments section so we can help answer them for you!